Do you know the assembly steps of medium shelf

Like light and heavy shelves, medium shelves are classified according to their load-bearing size. As the name suggests, medium-sized shelves are in the middle. Unlike heavy shelves, which must be installed by professionals, medium-sized shelves are more convenient to install. Customers can also install them by themselves as long as they know the steps. The following are the steps for the assembly of medium-sized shelves:

1. Before assembly, the main parts and accessories in all packages shall be separated and sorted according to categories. Then pick out the column of the shelf.

2. After picking out the column, take out the triangle. Install the triangle at both ends of each column. The triangle at the top and bottom are consistent in the installation direction, with right angles upward. Note that the place where the lower edge of column Z contacts the ground shall reserve enough height as the shelf foot according to the environment of the installation site.

3. After fixing the triangle, start installing the laminate. In order to facilitate installation, first fix the head and tail. The fixing method is: first fix the top of the column on the laminate, and then fix the other column on the laminate in the same way. The bottom mounting is the same as the top. Note: before the installation of the shelf, do not tighten the screws too tightly. After the installation, make sure that the shelf shape is normal and reinforce the screws after there are no other problems.

4. After the installation of the first and last two laminates, the column on one side of the whole shelf is installed, and then other laminates are installed with the same or different layer spacing according to their own needs.

The above is the process of shelf installation.